Resistors

There are 191 products.
New
Top Ventes
Bons plans
  • In Stock
    Résistance
  • In Stock
    Résistance
  • In Stock
    Résistance
  • In Stock
    Résistance
  • Promo In Stock
    Résistance
  • Promo In Stock
    Résistance

    The dotaio resistors manufactured by Dotmod are specially...

    The dotaio resistors manufactured by Dotmod are specially designed resistors for the DotAIO kit. Two resistance values are proposed (1.6 ohms and 0.3 ohms). They each have a different design to allow you to enjoy different vape sensations. These two resistances are focused on the restoration of flavors to allow you beautiful vape sessions. Sold in pack of 5

  • - 14 % In Stock
    Résistance

    Odan Aspire resistors are composed of 80% flax fiber and...

    Odan Aspire resistors are composed of 80% flax fiber and 20% organic cotton, which reduces the consumption of e-liquid. Easily replace your Odan clearomizer resistances from Aspire and enjoy moments of exquisite vaping. Sold in pack of 3

  • In Stock
    Résistance

    TFV16 resistors are compatible with the Smok TFV16...

    TFV16 resistors are compatible with the Smok TFV16 clearomizer. These resistances are made of nichrome mesh. The nichrome has a fast and homogeneous heating capacity around the fiber. Both resistors withstand power up to 120 watts!

  • Promo In Stock
    Résistance

    Subhoms resistances for your Cleito clearomizer for...

    Subhoms resistances for your Cleito clearomizer for intense steam and a faithful rendering of flavors. Cleito resistances are composed of a clapton coil in kanthal. Sold in pack of 5.

  • Promo In Stock
    Résistance

    Aspire Tigon resistors are compatible with Aspire Tigon...

    Aspire Tigon resistors are compatible with Aspire Tigon Clearomizer. Tigon resistors are manufactured with one of the best resistive wires on the market, the Ni80. Sold in pack of 5.

  • In Stock
    Résistance

    Nautilus BVC resistors fit over the entire Aspire...

    Nautilus BVC resistors fit over the entire Aspire Nautilus clearomiser series. They are also compatible with the Tyro and Cosmo clearomizers of the Vaptio brand. BVC stands for "Bottom Vertical Coil" which means that the resistance is designed vertically. Sold in pack of 5.

  • In Stock
    Résistance

    Reserved for Aspire Atlantis BVC clearomizers. These BVC...

    Reserved for Aspire Atlantis BVC clearomizers. These BVC "Bottom Vertical Coil" high performance resistors ensure excellent e-liquid impregnation thanks to the presence of organic cotton and a better vaporization of your e-liquid. Sold in pack of 5.

  • - 10 % In Stock
    Résistance

    The Melo 5 and Melo 4 clearomizers use new resistors made...

    The Melo 5 and Melo 4 clearomizers use new resistors made by Eleaf specifically for them. These last bring a great experience of vape as well as an excellent rendering of the flavors. They will also be compatible with the Melo 3 and Melo 2 clearomizers, just as their resistors will be backward compatible on the latest Melo models. Sold in pack of 5.

  • In Stock
    Résistance

    Mini Triton replacement resistors compatible with Plato...

    Mini Triton replacement resistors compatible with Plato TC, Nautilus and Mini Nautilus. Sold in pack of 5.

  • In Stock
    Résistance

    The body is made of stainless steel for better resistance...

    The body is made of stainless steel for better resistance to heat and high conductivity. The wick is made of Japanese organic cotton for a very great capillarity, allowing you to increase power while respecting the subtleties of your e-liquid. Compatible with the following Kangertech clearomizers: Subtank Nano, Subtank Mini, Subtank Plus, Toptank Nano, Toptank mini Sold in pack of 5.

  • In Stock
    Résistance

    T18 resistance for your Endura T18 Innokin clearomizer. A...

    T18 resistance for your Endura T18 Innokin clearomizer. A dual-coil strength with 20 openings for liquid irrigation and Japanese organic cotton. The T18 Resistance is the guarantee of obtaining the best flavor-and-vapor performance for your Endura T18 clearomiser. Sold in pack of 5.

  • In Stock
    Résistance

    The Dual Vertical Coil resistors for the Aspire PockeX...

    The Dual Vertical Coil resistors for the Aspire PockeX Pocket AIO kit are based on the famous manufacturer's U-tech technology. Destined rather for indirect inhalation, these resistors offer a beautiful vapor while maintaining the unique taste of your e-liquid. Sold in pack of 5.

  • In Stock
    Résistance

    The Herakles Honor Sense atomizer resistor allows upward...

    The Herakles Honor Sense atomizer resistor allows upward compatibility with the original Herakles platform. The 1.8 ohm (20 - 50 w) resistor features a reverse sandwich design that utilizes both a Japanese organic cotton wick element and porous food grade. Internally, the structure is surrounded by the ceramic element. Sold in pack of 5.

  • In Stock
    Résistance

    Made with Japanese organic cotton and high quality...

    Made with Japanese organic cotton and high quality resistive wire. They offer an exceptional rendering, accompanied by a good cloud of steam! 0.18ohm are for clearomizers : Ijust 2 / melo 2 / melo 3 / melo 3 mini. The 0.3ohm are for clearomiser: Ijust / Melo / Lemo Sold in pack of 5.

  • - 14 % In Stock
    Résistance

    Smoktech's TFV12 steam monster would not be as...

    Smoktech's TFV12 steam monster would not be as powerful without its dedicated resistances! Amazing cloud of steam, excellent rendering of flavors for you to choose the model that best fits your vape preferences! Sold in pack of 3.

  • In Stock
    Résistance

    The Juice Vertical Injection Coil (JVIC) consists of...

    The Juice Vertical Injection Coil (JVIC) consists of kanthal and Japanese organic cotton, all in a ceramic structure to be totally insulated from the rest of the tank to improve the performance of your AtoPack Penguin electronic cigarette. Sold in pack of 5.

  • Promo In Stock
    Résistance

    HW resistors are compatible with Eleaf ELLO clearomizers....

    HW resistors are compatible with Eleaf ELLO clearomizers. HW resistors consist of Stainless Steel or Kanthal, in mono or dual coil for very different vape experiences. Sold in pack of 5. ⚠ HW-T are sold in pack of 3 ⚠

  • - 13 % In Stock
    Résistance

    Resistance for the Innokin Endura T20 Kit. A value of...

    Resistance for the Innokin Endura T20 Kit. A value of 1.5ohms for an indirect inhalation vape and accepts a wide choice of liquid including those loaded with vegetable glycerin. Sold in pack of 5.

  • In Stock
    Résistance

    EUC resistors are a new range of high-performance...

    EUC resistors are a new range of high-performance resistors, which offer an excellent volume of steam and a natural flavor rendering. Sold in pack of 5.

  • In Stock
    Résistance

    The ProC-Bf resistor is specifically designed for the...

    The ProC-Bf resistor is specifically designed for the Cubis 2 Clearomizer and the Cuaio Kit. They have powers ranging from 8 to 30w and this declines in several ohm: 0.5, 0.6, 1.0 and 1.5 Caution resistance compatible with the CUBIS 2 - 2ML Sold in pack of 5.

  • - 17 % In Stock
    Résistance
    On sale!

    Ecigplanète introduces you to the new resistors for the...

    Ecigplanète introduces you to the new resistors for the TFV8 X-Baby Beast from Smok. They are powerful resistors with excellent flavor rendering and high steam production. There are two types of resistors: - Dual Coil V8 X-Baby Q2 0.4ohm is used over a range of 40 to 80W. - Dual Coil V8 X-Baby M2 0.25ohm is used over a range of 30 to 50W. Sold in pack of 3.

  • In Stock
    Résistance

    EC2 resistors are improved versions of EC heads from...

    EC2 resistors are improved versions of EC heads from Eleaf. Specially created for the Melo 4 D22 and D25, the EC2 resistors will also be compatible with the full range of Melo clearomizers and the Vaporesso Target Pro. They exist in two versions: 0.30 and 0.50 ohm. Sold in pack of 5.

  • Promo In Stock
    Résistance

    New clearomizer says new resistance. The resistance of...

    New clearomizer says new resistance. The resistance of the TFV12 Prince consists of kanthal and Japanese organic cotton. Only intended for direct inhalation. Compatible with high fat e-liquids with high levels of vegetable glycerin. We recommend using liquids with a minimum rate of 50VG. Sold in pack of 3.

  • Promo In Stock
    Résistance

    Replacement resistance for Prism T20 and Prism T20 S...

    Replacement resistance for Prism T20 and Prism T20 S clearomizers of the Endura T20 S kit. Resistance is used for indirect inhalation vape. Sold in pack of 5.

  • - 17 % In Stock
    Résistance

    Jem resistance, compatible with Innokin Jem clearomizer....

    Jem resistance, compatible with Innokin Jem clearomizer. The Jem resistor has a value of 1.60 ohms and does not require strong powers to be effective in flavor. Jem resistance is used with e liquids with LV levels up to 50%. Sold in pack of 5.

  • Promo In Stock
    Résistance

    Zenith resistors are manufactured by Innokin and...

    Zenith resistors are manufactured by Innokin and specially designed for the "Zenith MTL" clearomizer. Adapted for an indirect inhalation, they offer you a dense vape as well as a good restitution of the flavors. Sold in pack of 5.

  • - 14 % In Stock
    Résistance

    Exceed D22, Exceed D22C or Exceed D19 clearomizers use...

    Exceed D22, Exceed D22C or Exceed D19 clearomizers use the new EX atomizer heads, they will give you a very good impression of flavors in MTL (mouth to lung) or DL (direct lung). These resistors produce a cloud of very tasty steam. Sold in pack of 5.

  • Promo In Stock
    Résistance

    Nord Coil resistors are adapted to the Smoktech Nord Pod...

    Nord Coil resistors are adapted to the Smoktech Nord Pod kit. These resistors are available in different values depending on your type of vape: North Regular 1.40 Ohm Resistance: Specially designed for indirect inhalation vape (MTL) and all high-nicotine e-liquids or nicotine salts. Nord Ceramic resistance 1,40 ohms: stable ceramic and long lasting, in indirect inhalation. Mesh resistance...

  • In Stock
    Résistance

    Innovation Innokin Offered with the iSub-B clearomizer,...

    Innovation Innokin Offered with the iSub-B clearomizer, this Plex3D resistors typed high-end Mesh. With its 3D barbed and barbed metal band, the resistance offers unparalleled reactivity and large clouds of steam at low power. Sold by 5

  • - 14 % In Stock
    Résistance

    Resistors developed by Innokin for the Innokin T18...

    Resistors developed by Innokin for the Innokin T18 clearomizer. Designed for maximum impregnation thanks to its numerous aeration holes, these resistors offer optimum vape and absorption comfort for most e-liquids even when dosed in VG. Resistances 1.5 ohm or 2.0 ohm. Sold by 5.

  • In Stock
    Résistance
    On sale!

    Aspire BVC compatible with all the Aspire range (CE5-S,...

    Aspire BVC compatible with all the Aspire range (CE5-S, ET-s, Vivi Nova ...). Sold individually

  • In Stock
    Résistance

    Replacement resistors for JUSTFOG Q16, Q14, G14, C14and...

    Replacement resistors for JUSTFOG Q16, Q14, G14, C14and S14clearometers . These resistors are made of 100% organic Japanese cotton, they perfectly retranscribe the flavors and offer a beautiful white steam. - 1.2ohm They are fixed on the bottom of the tank for constant humidification. sold individually.  

  • - 17 % In Stock
    Résistance

    Joeytech resistors for Cubis Clearomizer and AIO kit It...

    Joeytech resistors for Cubis Clearomizer and AIO kit It is recommended to prime the resistance when first used. Sold individually.

  • - 17 % In Stock
    Résistance

    Nautilus X U-techresistance for your Nautilus...

    Nautilus X U-techresistance for your Nautilus Xclearomizer. This resistance consists of Kanthal for a value of 1.50 ohms. Usable between 14and 20watts in Power (or VW) mode. Sold individually

  • Promo In Stock
    Résistance

    The EUC traditional resistance is a new generation of...

    The EUC traditional resistance is a new generation of very economical resistors that can replace only the core of the coil without changing the metal body. Despite their eco-friendliness, EUC Veco Devil resistors offer a good volume of steam with a natural rendering of flavors. Sold in pack of 5.

  • Promo In Stock
    Résistance

    Replacement resistance for Smoktech TFV8 baby V2...

    Replacement resistance for Smoktech TFV8 baby V2 Clearomiser. The TFV8 Baby V2 is a high-performance mesh resistance with excellent flavor rendering and high steam output. Sold in pack of 3.

  • - 21 % In Stock
    Résistance

    Here are the resistors adapted to your Skrr clearomizer....

    Here are the resistors adapted to your Skrr clearomizer. These are made of organic cotton and offer you density of vape and vast restitution of flavors. Very robust, these resistances are also very reactive. For vape experiences tailored to your desires and needs.

  • In Stock

    Replacement cartridge for the flat solo pod. It allows...

    Replacement cartridge for the flat solo pod. It allows you to benefit from 1.5ml of capacity. It has an integrated resistance of 1.5ohm. The filling is done from the top on the hard port side, be careful not to put liquid in the chimney. Pack of 4

  • Promo In Stock
    Résistance

    GT Cores resistors adapted to the NRG Tank but also to...

    GT Cores resistors adapted to the NRG Tank but also to the Cascade Baby SE Tank, TFV8 Baby and Big Baby. GT Core resistors are made of cotton. Resistors sold by 3.

  • In Stock

    Resistance RX Dual 0.15ohm for Clearomizer Reux. Power...

    Resistance RX Dual 0.15ohm for Clearomizer Reux. Power range: 100 - 260 W Pack of 5 resistors

  • In Stock

    For a versatilerebuildableatomizer capable of capturing...

    For a versatilerebuildableatomizer capable of capturing high power, this is the stage you need! Designed on the same principle as traditional velocity trays T4 (designed for dual and quad coil) and the studs are drilled at 2mm to accommodate any resistive wire.

  • In Stock

    Rebuildable head RBA Cubis BFcompatible with the Cubis...

    Rebuildable head RBA Cubis BFcompatible with the Cubis Tank3.5ml Joyetech. Ideal for making rebuildable mountings suitable for your style of vapor! RBA head supplied with numerous accessories including two mountings in 0.5Ω, make sure that your material is compatible. Reserved for connoisseurs of reconstructible atos.

  • In Stock

    RBA TFV4 rebuildable plate resistant compatible with TFV4...

    RBA TFV4 rebuildable plate resistant compatible with TFV4 Smok. Single Coil Resistance RBA TFV4 Smok 0.85Ω: TF-R1 This "resistance" is intended for experienced vapoteurs who know how to rebuild resistance. Plateau RBA TF-R sold by the unit

  • Soon Out of stock
    COMING SOON
  • Soon Out of stock
    COMING SOON
  • Soon Out of stock
    COMING SOON
  • rupture Out of stock
    COMING SOON